Monday, January 5, 2009

FINGER JOINT TOOLING

ACE-LOC FINGER JOINT HEADS
Ace-Loc finger joint heads represent the most accurate advancement in hydraulic, self-centering finger joint cutter heads. Ace-Loc finger joint cutter heads offer longer finger joint cutter life, more accurate cuts, and quicker tool changes.
Ace-Loc Heads

BEST USES
* High Speed
* High Production
* All Finger Joint Lengths
* 9.000” to 19.000” Extreme Swing
* Horizontal Finger Joints

BENEFITS
* Uses Standard AceCo Finger Joint Cutters
* High Precision
* Durability
* Low Maintenance
* Long Finger Joint Cutter Life
* 7200 RPM Balancing

CLASS II PREMIUM FINGER JOINT HEADS
Class II heads ensure the most accurate finger joints possible. The bottom plate (knife face) is guaranteed to be within .0005” (.0125 mm) perpendicularity to the bore.
Class II Premium Heads

BEST USES
* High Speed
* High Production
* Micro-joints (5mm and shorter)
* 9.000” to 10.500” Extreme Swing
* Horizontal Finger Joints

BENEFITS
* Uses Standard AceCo Finger Joint Cutters
* High Precision
* Durability
* Low Maintenance
* Long Finger Joint Cutter Life
* 7200 RPM Balancing

STACKABLE FINGER JOINT SYSTEM
The solution for very tall finger joints and custom applications.
Stackable Finger Joint System

BEST USES
* Moderate Speed
* Tall Vertical Finger Joint Stacks

BENEFITS
* Uses Standard AceCo Finger Joint Cutters
* Durability
* Low Maintenance
* Long Finger Joint Cutter Life
* 7200 RPM Balancing

COLLET FINGER JOINT HEADS
Collet Heads

BEST USES
* Low Production Runs
* Machines That Cannot Fit Hydraulically-Centered Finger Joint Heads

BENEFITS
* Uses Standard AceCo Finger Joint Cutters
* Economical
* Reliable
* Low Maintenance
* 7200 RPM Balancing

DUAL-EDGE FINGER JOINT TOOL SYSTEM
Please review the Dual-Edge Finger Joint Tool System page for more information.
Dual-Edge Finger Joint Tool System

BEST USES
* High To Low Production
* Smaller Cutting Circles
* Single Or Dual Spindle Compatible
* Taller Finger Joint Stack Heights
* Machines Without Trim Saws

BENEFITS
* Double Finger Joint Cutter Life (indexable cutter w/two tips)
* Ability To Fit On Most Finger Joint Machines
* Cost Effective Replacement Of European Wing Type Finger Joint Tooling
* High Degree Of Accuracy
* Easy Maintenance
* 7200 RPM Balancing

CUTTER MATERIALS
* M2 HSS
* Evolution 3
* Carbide
* Dia-Max



All AceCo finger joint heads are precision machined from hardened alloy steel to resist the daily abuse of an industrial millwork operation. AceCo’s finger joint heads are known to run smoother and last longer than any other finger joint head made. From 2 to 20 bolts, AceCo offers the widest selection of standard and custom finger joint heads to fit most finger jointing machines.
High Tensile Alloy Steel:

4150 Heat-treated steel for maximum durability and performance.
Hardened Radius Gibs:

Heat-treated all the way through to resist screw wear; radius design provides better chip flow.
Deeper and Wider Knife Pockets:

Allows for use of wider knife steel. Can accommodate up to 10mm thick knife steel.
Allen Head Gib Screws:

Square or Hex head screws are available.
Plunger Style Grease Zerks:

The plunger style is cleaner and more reliable than a check ball.
Grease Fittings:

Located on all end faces. Also located on outside diameters when possible.
Standard Cutting Angles:

12° or 20° standard cutting angles to handle hard or softwoods.
Knife Pocket Options:

16-60° Corrugated or Flat Back knife steel.
7200 RPM Balancing:

Precision balanced on a computer-aided dynamic balancer to ISO Grade G -1.0, far beyond industry standards.
Hydraulic Centering:

Ace-Loc hydraulic sleeves ensure repeatability, accuracy, and balance. Heat-treated sleeves are available for keyed spindles.

FINGER JOINT HEAD SPECIFICATIONS
To order or request a quote, please specify the following:
Finger Joint Head Specifications
EXTREME SWING (Cutting Circle)

* Diameter across head from cutting tip to tip.

NUMBER OF BOLTS (or WINGS)

* 4 Knife
* 6 Knife
* 8 Knife
* 10 Knife
* Custom Size

SPINDLE DIAMETER

* 1.500"
* 1.813"
* 50mm
* 2.125"
* Custom Size

CENTERING TYPE

* Ace-Loc Hydraulic*
* Straight Bore
* Collet

Finger Joint Head Specifications
NUMBER OF BOLTS (or WINGS)

* 4 Knife
* 6 Knife
* 8 Knife
* 10 Knife
* Custom Size

SPINDLE DIAMETER

* 1.500"
* 1.813"
* 50mm
* 2.125"
* Custom Size

CENTERING TYPE

* Ace-Loc Hydraulic*
* Straight Bore
* Collet

Finger Joint Specifications
FINGER JOINT LENGTH

* Ace-Loc Hydraulic*
* Straight Bore
* Collet

MATERIAL THICKNESS

*

JOINT TYPE (go here)

* Reverse
* Male/Female
* Feather
* Other

FINGER JOINT MACHINE INFORMATION

* Make/Model
* Number of Spindles
* R.P.M.
* Feed Rate
* Lug or Packet Style
* Trim Saws: Yes
*
* Additional Options:
* *Heat Treated Sleeves for Keyed Spindles

No comments:

Post a Comment